EVgata Diagnostic Tool for Tesla

EVgata Tesla Diagnostic Tool

Introducing the EVgata Diagnostic Software – the ultimate solution for Tesla owners and professionals. Developed specifically with our customers in mind, this software is packed with new and advanced features that make working with Tesla models a breeze. Our company is dedicated to providing “True Gear for True Professionals,” and this software is no exception.

The software is constantly updated, and these updates are automatic, ensuring the best possible experience for our customers. The software is specifically designed to be user-friendly, and our goal is to make it as easy as possible to use.

This software is fully compatible with Tesla Model S and Tesla Model X mcu1 (nVidia Tegra cpu) up to version 2022.8.10.5 and includes the following features:

– Scan the vehicle’s modules and report active and historical alerts
– Air suspension – set ride height, enter service mode, force gallery pressure, get pressure, live ride height, clear TAS crash data
– Brakes/ESP/TPMS – read/write TPMS ID for GEN 2 TPMS, perform brake bleeding, calibrate the steering wheel angle, activate EPB service mode, get versions
– Airbag – read/write Eeprom, clear crash data (Model X only), read resistance
– Body – door handle ICE breaker, calibrate the steering wheel column, rear wing calibration
– Battery/BMS – read BMS serial number, reset BMS contactor, reset contactor stress index, reset contactor WOT counter (can connect to HV battery without the car via can-bus with an external 12V power supply)
– Cooling – start/stop THC air purge, start/stop THC refill/drain
– Bench – power on/off IC on the bench
– Live data – read alerts
– Advanced functions – read car vitals, turn keyless driving on/off, enable/disable valet mode, enable/disable showroom mode, reset IC, master reset, reset CID, reset GW, allow GW telnet, bus wake, rails on, enter/exit diag, enter/exit factory mode, enter/exit development mode – all functions via VAPI interface.

– Reading all current and historical alerts
– Reading and writing configurations, recalibrating the odometer, enabling Pin to Drive, moving the vehicle in an emergency, and disabling Pin to Drive

Additionally, our software offers the following benefits:

1. Installs firmware on the vehicle
2. Reprogramming of used parts modules to adapt to the vehicle
3. Downloads the current firmware version from the vehicle to assist when changing the emmc chip in the CID
4. Enables the GW serial console to the CID
5. Includes functions for bench setup of the IC
6. Can back up and restore the IC
7. Retrofits modules through GW/CID configuration
8. Sets configuration for conversions between US/EU and swapping radio and charger modules
9. Recodes new batteries if different from the original
10. Programs a key for the Model S

Activating Factory Mode

Vehicle Diagnostics

 

Gateway Tools

Model S Key Programming

Vehicle Diagnostics Live data

 

MCU Settings

 

Vehicle Modules

 

Vehicle Updater

The software contains the following functionalities for – Model 3 and Model Y

– ACTIVATE FACTORY MODE ( up to version 2021.4.3). With factory mode enabled you have access to all service functions

– CLEAR PIN TO DRIVE

– REDEPLOY

– CHANGE GATEWAY CONFIG (Activate/Deactivate Supercharger, Autopilot, Change country…)

– ADD PARAMETER

– UPDATE MAPS

– CHANGE MAP REGION

– CONVERT US TO EU
– READ and Export Secure Config from Gateway for models 2021+ with locked MCU via LAN

– TRANSFER configuration to DUMP ready to program to new MCU (2021+ models)

– Preparing a file ready to program with different programmers like PEMicro, XPROG….

– Functionalities by CAN BUS like – Live data, Calibrate Body Components, Seats calibrations, Windows calibrations, Steering Column Calibration….

– AIRBAG VIA CAN BUS – Read/Write eeprom, Clear crash(up to 2021); Check Resistance….

– DIAGNOSTICS – Alerts/DTCs; Vitals….

– Online update via our server for all mcu2 cars with Ape HW 2.5

READ and Export Secure Config from Gateway

Configuration of the car

Original Configuration

NEW Configuration

Updates:

There is an annual subscription for the EVgata Tesla Diagnostic tool that is paid after the first year has expired. Its price is € 300 for each subsequent year.

All software with an active subscription have automatic updates (after starting the software and connected to the Internet, the software will be upgraded to the latest version). At the same time, most of the updates are done on the server side.

Subscribed customers will receive our updates regularly. An expired subscription tool will not receive regular updates.

•   To use the software you must already have some of the hardware or purchase it together with the software.

Prices:

EVgata software – 3000 euro

OBDII interface (EVgata)* – 100 euro

Service Cable Ethernet -> FakraHSD – 50 euro

Hardware to be able to connect to Model 3 and Model Y – 500 euro

Annual subscription after the first year – 300 euro

* PCAN interface (or compatible) – This is for customers who already have such an interface, our software can work with it as well.

All prices are without VAT