Tesla Diagnostic Tool (T-Diag)
€500.00 – €3,700.00
We are pleased to present the Tesla Diagnostic Tool (T-Diag)
Are you looking to diagnose and repair TESLA vehicles? This Tesla Scan Tool (T-Diag) is designed specifically for you!
This Tesla Diagnostic Software currently supports the following models:
- Model S
- Model X
- Model 3 (with additional hardware). Supported functions:
- Activate factory mode —> For more information click here.
- Clear pin to drive
- Change gateway config
- Convert US to EU
- Change map region
- With factory mode enabled you have access to all service functions.
- Update maps
Please keep in mind that all functions are supported on non-rooted MCU1(Tegra) and MCU2(Intel**) with versions up to 2021.4.3
* to use white fakra, first you must put the car in factory mode via black connector behind IC
Windows 10 supported only
Features of our Tesla diagnostic tool software (T-Diag):
- The software can redeploy car (adjustment of non-original vehicle modules reprogramming of used parts modules)
- By downloading the current firmware version from the car to assist when changing eMMC chip in CID if the eMMC is damaged and can not be read. As a result, with the Tesla Diagnostic Tool, you can extract car configuration from the car without CID and generate files needed for the new CID eMMC image. This way, you do not have to worry about the Spansion chip version.
- With the Tesla Scan tool, you can enable GW Serial console to CID.
- The Tesla Diagnostic Tool can install the firmware on your car.
- Functions for bench setup of IC
- Backup and restore IC.
- Set configuration if you do US/EU Conversion, and swap radio and charger module
- Retrofit modules by GW/CID configuration
- Recode new battery, if different from original
► T-Diag Main Package:
The main package includes → OBDII interface + Dongle + USB Lan Hub + Basic software.
- Scan the available modules in the vehicle + Read and clear all DTCs
- Air suspension – Set Ride Heigh, Service mode, Force Gallery Pressure, Get Pressure, Live Ride Heigh, TAS Clear Crash Data.
- Brakes/ESP/TPMS – Read TPMS ID, Brake Bleeding, Steering Wheel Angle calibration, Activate EPB Service Mode, Get Versions
- Airbag – Read/Write EEPROM, Clear Crash Data, Read Resistance
- Bench – Power On/Off IC on Bench
- Live Data – Read Alerts
- Advanced functions – Read Car Vitals, Keyless Driving ON/OFF, Valet MODE Enable/Disable,
Showroom Enable/Disable, Reset IC, Master Reset, Reset CID, Reset GW, GW Telnet Allow,
Bus Wake, Rails ON, Enter/Exit Diag, Enter/Exit Factory Mode, Enter/Exit Development Mode.
- Alerts – Read All and Current alerts.
- Body – Door Handles ICE Braker, Steering Wheel Column calibration, Rear wing Calibration
- Battery/BMS – BMS Read Serial number, BMS Contactor Reset, Reset Contactor Stress Index, Reset Contactor WOT Counter
- Cooling – THC AirPurge Start/Stop, THC Refill/Drain Start/Stop
► T-Diag Advanced Package:
The Advanced package includes :
- Odometer recalibration
- Emergency moving
- Read/Write Configuration
- Pin-to Drive
- Disable Pin-to Drive
- Key programming for Model S ( Add key or All keys lost)
► T-Diag Model 3 Package
Model 3 supported functionality:
• Activate Factory Mode
• Clear PIN to Drive
• Change Gateway Config
• Update Maps
• Change Map Region
• Convert US to EU
With factory mode enabled you to have access to all service functions
*The Model 3 package includes Hardware to connect to Tesla Model 3 Vehicles
► Full Package:
Main + Advance Package + Model 3 Package
Annual subscription after the first year: 300€
* to use white FAKRA, first you must put the car in factory mode via black connector behind IC
Windows 10 supported only
For more information, contact us! One of the best Tesla Scan tool on the market
Tesla Diagnostic Tool
Advanced Package, Full Version (Main + Advanced + Model 3 Packages), Main Package, Main Package + Advanced Package, Model 3 Package